Pearl Set,Jewellery Pearl Set,Fresh Water Jewellery Pearl Set Pearl Earring,Gemstone Strand,Pearl Pendant Co., Ltd. , http://www.piercingjewelry-manufacturer.com
The original look of the hair is very long, plated together, in a variety of colors. The first process: cutting the old hair can not be used directly for wigs , it needs to be cut to the required length. This process is called cutting and cutting hair lengths are different, you can do growth and short hair. If the color of the finished wig is mixed, the hair must be color-matched according to the drawings. For example, 2T33 color is composed of 2nd color and 33rd color. When opening, two colors must be opened.
The second process: the whole hair <br> The newly cut hair is more chaotic and needs to be combed well. At the same time, some color-mixed wigs need to be evenly divided by this process. The tool for the whole hair is the large steel tooth comb in the figure. For example, wine red and natural black, you can mix these two colors through this process. Two-color, three-color, and even multi-color can be completed through the whole hair process.
The third step: <br> per pound hair wig has a specified weight, too thick is not natural, nor apparently too thin. The staff needs to be sent according to the drawings. The weight of the staff directly affects the production process below, so this process is very important.
Fourth process: Before the row of hair <br> are some of the necessary preparatory work, this procedure began to truly make secret contact with the wig. Discharge is to make the hair on a line, the workers' hands are just a good hair, and they are connected together through these three discharge machines. This type of dispenser is not readily available on the market and must be modified by the mechanics in the factory. The level of its modification technology directly affects the quality of the discharge, such as whether the wig is easy to fall off, this process plays a vital role. Therefore, the high-level mechanics of the factory are generally quite high.
The fifth process: truncation <br> The hair after the hair is very long, the whole hair of the car must be divided into the required length is the cut, and the length of each can not exceed the length The length of the stick, this process is relatively simple.
The sixth process: washing water <br> The cut hair, after washing the water to absorb nutrients.
The seventh procedure: hair pieces and hair inserted after the press Sankeng <br> to dry hair to go through the insert and the pressure Sankeng do the most original styling hair plug: main role is to increase the degree of fluffy hair, usually concentrated in the Liu Hai and the top part.
Pressing the three pits: Its main role is to not stick to the human scalp, generally in the back of the head part.
Everyone can see that the top of the wig is full, very type, not pointed, sticking to the scalp, which is the credit for the two processes of inserting and pressing the three pits. Generally, the production of low-priced wigs will save these two processes to save production costs.
Eighth procedure: The curvature <br> hair wig design, using tubes of different sizes.
The ninth process: baking hair <br> In the process of sales, some buyers often ask me. Curly hair, do you not wear it twice? Look carefully below and you will know the answer. According to the requirements of the drawings, the split springs are placed in a bar of suitable curvature, placed in an oven, and set at a constant temperature of 88 degrees Celsius. After baking for 2 hours, it is taken out and then unsealed, so that the hair is not easy. Distorted. After the completion of the rolling, some of the raw materials are transferred to the high car process, and the other part is placed in the scalp process.
Note: Different materials, different seasons and weather will have an effect on the temperature of the oven. It is technically difficult to determine the temperature.
The tenth process: Liu Hai pressure pit <br> Doing a crater process on Liu Hai's clockwork can prevent the bangs from sticking to the forehead and causing the shape.
Eleventh processes: high <br> car trucks, is to a good baking sheet wig, wig sewn. For high-quality wigs , this process is more complicated and requires a lot of technicians. A skilled worker can only drive 30 to 40 cars a day. The same workers can produce more than 100 tops a day if they have a low-quality wig . There are obvious differences in labor costs here.
Let's take a look at how the high car is going.
The twelfth process: scalp making process <br> The scalp, this is very important. Although the wig of a good wig looks only a little large, it affects the simulation of the wig . Because that point is completely exposed, there is no hair, it is like the birth point of a real person. No hair. It is completely scalp. Not much to say, how to make a wig to simulate a real human scalp. It is not possible to put the scalp directly on top of the wig . There must be hair, which is realistic.
The thirteenth process: the production process of the net cap <br> The net cap has imported and domestically produced points. The imported mesh cap is flexible, firmer and more comfortable to wear.
Fourteenth procedure: first comprehensive quality control <br> This process is generally high car foreman complete, check the position of the car, hair, lines uniform, whether there are off-line, whether wig weight standards, substandard products Will return to the previous process and rework.
Fifteenth procedure: carded <br> vehicle height wig, the basic shape. What else do you need to do next? That is the carding work, and the wigs are combed neatly on the special steel tooth comb.
The 16th process: washing water <br> This is not the usual water. It is made with pure water and a care solution. Soak the wig in the formulated care solution for 30 minutes to increase the feel.
Seventeenth procedure: <br> wig to dry after washing off the dehydrator dried dry water, remember, oh not direct sunlight.
Eighteenth procedure: to split the cap <br> this step, there is a plastic film backside of the wig. Must be removed, and the thread must be cut off
The nineteenth process: finishing the scalp <br> This process, more barbaric ~
Twenty-procedure: second comprehensive quality control inspection <br> wig in the hybrid yarn and thread again, to do a comprehensive clean-up.
Twenty-one process: do take care of the whole wig hair <br>, including fringe trim.
The twenty-second procedure: Packaging <br> this is the last process, and put our own e amazing tag, put a ball of paper and surrounded by special cards (to prevent deformation wig placement and transport), put on plastic The bag can be packed. The production process of the wig is basically the same.
<br> hair hair piece, wigs made of raw materials. There are two kinds of real hair and chemical fiber. Real hair is rarely asked because of the high price. Fashion wigs that are currently popular on the market are basically made of chemical fiber. In China, there are three kinds of chemical fiber: domestic silk, Korean silk and Japanese silk. Different hairs directly determine the feel, gloss, quality and durability of the wig . Of course, the prices of these three hairs are very different. Among them, the hair produced by Japan's Kani Karen is recognized as the most suitable hair for the production of wigs . Whether it is the feel or the gloss, it is very close to the real hair, super realistic. The hair of the ever-changing wig is the hair that is used to ensure the quality of the wig from the source.